Perancangan Sistem Informasi Mesin Produksi Pada Industri Tekstil Menggunakan Metode Overall Equipment Effectiveness
DOI:
https://doi.org/10.55826/jtmit.v5i1.1573Keywords:
Overall Equipment Effectiveness, Sistem Informasi, Industri Benang TekstilAbstract
Studi ini bertujuan untuk merancang dan mengimplementasikan sistem informasi Overall Equipment Effectiveness (OEE) di industri manufaktur benang tekstil menggunakan data produksi harian untuk September 2025. Perhitungan OEE didasarkan pada indikator Ketersediaan, Kinerja, dan Kualitas. Metodologi penelitian meliputi pengumpulan data produksi, analisis sistem, desain sistem, dan evaluasi kinerja OEE. Sistem informasi yang dikembangkan memproses waktu kerja standar, jumlah mesin, waktu henti, produksi standar, produksi aktual, dan data cacat secara otomatis untuk menghasilkan laporan OEE harian dan tren kinerja. Hasil menunjukkan bahwa nilai OEE rata-rata tetap di bawah tolok ukur kelas dunia sebesar 85%, dengan nilai harian berkisar antara sekitar 38% hingga 55%. Faktor dominan yang berkontribusi terhadap OEE rendah adalah waktu henti yang tinggi dan penurunan kecepatan produksi, sementara penurunan kualitas relatif kecil dengan tingkat cacat di bawah 1%. Implementasi sistem informasi OEE meningkatkan akurasi pelaporan dan mendukung pengambilan keputusan manajemen untuk peningkatan berkelanjutan dan implementasi Total Productive Maintenance di industri benang tekstil.
References
[1] S. Gupta, M. Sharma, and M. V. Sunder, “Lean, TPM and OEE based framework for manufacturing performance improvement,” International Journal of Productivity and Performance Management, vol. 70, no. 8, pp. 2063–2084, 2021, doi: 10.1108/IJPPM-03-2020-0122.
[2] P. Muchiri, L. Pintelon, L. Gelders, and H. Martin, “Development of maintenance performance measurement framework using overall equipment effectiveness,” Journal of Manufacturing Technology Management, vol. 32, no. 2, pp. 421–440, 2021, doi: 10.1108/JMTM-09-2019-0345.
[3] A. Rahman and M. Kholil, “Analisis efektivitas mesin menggunakan metode overall equipment effectiveness dan six big losses,” Jurnal Teknik Industri, vol. 23, no. 2, pp. 101–110, 2021, doi: 10.14710/jti.23.2.101-110.
[4] F. I. Aryanti, T. B. Santoso, F. P. Christian, and D. A. Putra, “Implementasi total productive maintenance dalam penerapan overall equipment effectiveness di industri manufaktur,” Journal of Community Services in Sustainability, vol. 1, no. 1, pp. 1–8, 2023, doi: 10.52330/jocss.v1i1.135.
[5] Y. Siswanto, T. Hidayat, and D. R. S. Budi, “Analisis total productive maintenance berdasarkan nilai overall equipment effectiveness pada moulding PMS line,” Jurnal Teknologi dan Manajemen, vol. 21, no. 2, pp. 151–160, 2023, doi: 10.52330/jtm.v21i2.127.
[6] A. Pambudi and D. Setyawan, “Sistem informasi overall equipment effectiveness berbasis web untuk monitoring kinerja mesin produksi,” Jurnal Sistem Informasi Industri, vol. 5, no. 1, pp. 15–26, 2023, doi: 10.33365/jsii.v5i1.2146.
[7] Y. K. P. Pamungkas, R. F. Umam, and R. Setyaningrum, “Peningkatan produktivitas melalui total productive maintenance menggunakan perhitungan overall equipment effectiveness dan six big losses,” Innovative: Journal of Social Science Research, vol. 4, no. 5, pp. 7351–7363, 2024, doi: 10.31004/innovative.v4i5.14918.
[8] M. V. Ahmadi, A. W. Rizqi, and E. D. Priyana, “Analisis overall equipment effectiveness dengan penerapan total productive maintenance pada continuous ship unloader,” INTECOM Journal, 2025, doi: 10.31539/mh2d8056.
[9] D. Afiansyah, E. D. Priyana, and H. Hidayat, “Analysis of TPM using OEE and FMEA methods on plan-2 dolomite fertilizer machine,” G-Tech, vol. 9, no. 2, pp. 695–704, 2025, doi: 10.70609/gtech.v9i2.6595.
[10] Y. K. P. Pamungkas, R. F. Umam, and R. Setyaningrum, “Peningkatan produktivitas melalui total productive maintenance menggunakan perhitungan overall equipment effectiveness dan six big losses,” Innovative: Journal of Social Science Research, vol. 4, no. 5, pp. 7351–7363, 2024, doi: 10.31004/innovative.v4i5.14918.
[11] M. Sony and S. Naik, “Industry 4.0 enabled total productive maintenance and OEE for smart manufacturing systems,” International Journal of Production Economics, vol. 258, p. 108805, 2024, doi: 10.1016/j.ijpe.2023.108805.
[12] S. Suhendra and T. N. Wiyatno, “Increasing overall equipment effectiveness on 650T injection machines with a lean manufacturing approach,” Jurnal Informasi dan Teknologi, vol. 6, no. 3, pp. 17–24, 2024, doi: 10.60083/jidt.v6i3.584.
[13] S. Supriyati, T. N. Wiyatno, W. Hadikristanto, and R. Rusdianto, “Analisis mesin produksi untuk meningkatkan kinerja dengan metode overall equipment effectiveness,” Heuristic, vol. 21, no. 1, pp. 23–32, 2024, doi: 10.30996/heuristic.v21i1.9741.
[14] A. Gola, G. Kłosowski, and M. Jasiulewicz-Kaczmarek, “Digital OEE systems for maintenance decision support in Industry 4.0,” Sensors, vol. 25, no. 3, p. 812, 2025, doi: 10.3390/s25030812.
[15] Z. Zulheri, K. L. Mandagie, and B. Arianto, “Analisis penerapan total productive maintenance dan kaizen
untuk meningkatkan overall equipment effectiveness,” Jurnal Teknologi Industri, 2023, doi: 10.35968/jti.v8i0.662.
[16] M. Sony and S. Naik, “Industry 4.0 enabled total productive maintenance and OEE for smart manufacturing systems,” International Journal of Production Economics, vol. 258, p. 108805, 2024, doi: 10.1016/j.ijpe.2023.108805.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Tri Ngudi Wiyatno, Chintya Meldeasafitri, Fahrul Arifin, Nur Hayati, Aulia Wiwin Safitri
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
