Optimalisasi Penerapan Total Productive Maintenance Pada Mesin Mosher I Dengan Metode Overall Equipment Effectiveness
DOI:
https://doi.org/10.55826/jtmit.v4iI.526Keywords:
Total Productive Maintenance, Overall Equipment Effectiveness (OEE), Mesin Mosher, Efektivitas Produksi, DowntimeAbstract
Mesin Mosher merupakan salah satu komponen utama dalam proses produksi bahan baku disebuah perusahaan multinasional di Indonesia yang berfokus pada industri semen. Mesin ini berfungsi sebagai penghancur material, sehingga efektivitas operasionalnya sangat berpengaruh terhadap kualitas produksi. Oleh karena itu, analisis penerapan Total Productive Maintenance (TPM) dengan metode Overall Equipment Effectiveness (OEE) diperlukan untuk menilai efisiensi mesin dalam mendukung proses produksi. Penelitian ini menggunakan data dari pekerja shift 1 serta waktu operasi Mesin Mosher I selama dua minggu pertama bulan Februari 2023. Hasil analisis menunjukkan bahwa perusahaan telah menerapkan kegiatan monitoring dan maintenance secara berkala, namun masih terdapat total waktu downtime sebesar 528 menit, yang berpotensi mengurangi efektivitas mesin. Sebagai solusi, disarankan untuk melakukan inspeksi berkala secara lebih ketat, serta memastikan penggunaan suku cadang asli atau material dengan daya tahan lebih tinggi dalam proses penggantian komponen guna meningkatkan efisiensi dan mengurangi downtime.
References
N. R. Dian and D. Yulhendra, “Optimalisasi Kinerja Limestone Crusher IIIA ( LSC IIIA ) Dengan Metode Overall Equipment Effectiveness ( OEE ) Untuk Memenuhi Target Produksi Limestone Di PT . Semen Padang Kecamatan,” vol. 4, no. 3, pp. 143–153.
A. A. Melkias and M. R. Soekarno, “Analisis Kinerja Limestone Crusher 231 . CR,” Pros. 13th Ind. Res. Work. Natl. Semin., pp. 13–14, 2022.
P. A. C. Nugroho, A. Wiweko, and M. S. Siregar, “Main Switch Board Plan Maintenance System on MV. Kirana III,” ATRIA J. Multidisiplin Ris. Ilm., vol. 1, no. 1, pp. 7–14, 2024, doi: 10.62554/r6axsk18.
N. H. Siregar and S. Munthe, “Analisa Perawatan Mesin Digester dengan Metode Reliabity Centered Maintenance pada PTPN II Pagar Merbau,” Jime (Journal Ind. Manuf. Eng., vol. 3, no. 2, p. 89, 2019, [Online]. Available: http://ojs.uma.ac.id/index.php/jime
N. Iskandar, Sulardjaka, and A. Pradyta, “Studi dan Aplikasi Reliability Centered Maintenance pada Hoist Crane,” ROTASI, vol. 23, no. 4, pp. 50–57, 2021.
D. Yusri and C. Anwar, “Evaluasi Penerapan Total Productive Maintenance Pada Lini Produksi Packhouse Di Pt Xwz, Tbk- Narogong Plant,” J. Sains Terap., vol. 12, no. Khusus, pp. 1–14, 2022, doi: 10.29244/jstsv.12.khusus.1-14.
N. Yuselin, E. Rosyidi, and A. Y. Pratama, “Meningkatkan Availability Rate Dengan Mengurangi Downtime Untuk Penerapan Total Productive Maintenance (Tpm) Pada Area Mixing,” Technologic, vol. 11, no. 1, pp. i–37, 2020.
A. Wahid, “Penerapan Total Productive Maintenance (TPM) Produksi Dengan Metode Overall Equipment Effectiveness (OEE) Pada Proses Produksi Botol (PT. XY Pandaan – Pasuruan),” J. Teknol. Dan Manaj. Ind., vol. 6, no. 1, pp. 12–16, 2020, doi: 10.36040/jtmi.v6i1.2624.
M. Hasanudin, “Analisis Penerapan Total Productive Maintenance Menggunakan Overall Equipment Effectiveness dan Fuzzy Fmea Pada Mesin Extruder di PT Xyz Bogor,” Sci. J. Ind. Eng., vol. 1, no. 2, pp. 53–58, 2020.
P. Suwardiyanto, D. Siregar, and D. Umar, “Analisis Perhitungan OEE dan Menentukan Six Big Losses pada Mesin Spot Welding Tipe X,” J. Ind. Eng. Sist., vol. 37, no. 2, pp. 172–178, 2020, [Online]. Available: https://ci.nii.ac.jp/naid/110003378770/
J. Gianfranco, M. I. Taufik, F. Hariadi, and M. Fauzi, “Pengukuran Total Productive Maintenance (Tpm) Menggunakan Metode Overall Equipment Effectiveness (Oee) Pada Mesin Reaktor Produksi,” J. Lebesgue J. Ilm. Pendidik. Mat. Mat. dan Stat., vol. 3, no. 1, pp. 160–172, 2022, doi: 10.46306/lb.v3i1.109.
T. Ahdiyat and Y. A. Nugroho, “Analisis Kinerja Mesin Bandsaw Menggunakan Metode Overall Equipment Effectiveness (Oee) Dan Six Big Losses Pada Pt Quartindo Sejati Furnitama,” J. Cakrawala Ilm., vol. 3, no. 2, pp. 58–66, 2022.
A. Nurqomaruddin, Y. Haryono, and T. Suhandini, “Analisis Total Productive Maintenance dan Overall Equipment Effectiveness Pada Mesin Mill Unit 2 Di PT,” PJB UP Pait. / JISE, vol. 1, no. 1, pp. 7–16, 2022.
Z. Arifin, “Implementasi Overall Equipment Effectiveness ( OEE ) Dalam Penerapan Metode Total Productive Maintenance (TPM) di PT. FJT,” PROFISIENSI J. Progr. Stud. Tek. Ind., vol. 8, no. 1, pp. 55–63, 2020, doi: 10.33373/profis.v8i1.2579.
R. A. Perwira, R. Wahyudi, and A. T. Nugraha, “Analisis Efektivitas Rotary Car Dumper (RCD) 3 dengan Metode Overall Equipment Effectiveness (OEE) di PT Bukit Asam Unit Pelabuhan Tarahan,” J. Integr., vol. 16, no. 1, pp. 48–57, 2024, doi: 10.30871/ji.v16i1.6675.
R. C. H. Putra and J. Aidil, “Analisis Performance Mesin Hammer Mill Menggunakan Metode Reliability Availability Maintainability (Ram) Di Pt. Xyz,” Juminten, vol. 2, no. 4, pp. 133–144, 2021, doi: 10.33005/juminten.v2i4.240.
O. Rabiatussyifa, F. N. Azizah, and A. D. Ardhani, “Analisis Produktivitas Mesin Buffing Menggunakan Metode Overall Equipment Effectiveness (OEE) Di PT. XYZ Cikarang, Jawa Barat,” Ilm. Wahana Pendidik., vol. 8, no. 3, pp. 95–102, 2022, doi: 10.5281/zenodo.6301691.
D. O. Shafitri, A. Larasati, and A. M. Hajji, “Peningkatan Nilai Overall Equipment Effectiveness Mesin Stone Crusher Dengan Menggunakan Pendekatan Total Productive Maintenance (Studi Kasus Pt. Brantas Abipraya),” Ind. Inov. J. Tek. Ind., vol. 12, no. 2, pp. 73–87, 2022, doi: 10.36040/industri.v12i2.4007.
V. I. Lestari and J. A. SZS, “Analisis Efektivitas Mesin Pada Stasiun Ketel Dengan Menggunakan Metode Overall Equipment Effectiveness (Oee) Di Pt. Xyz,” Tekmapro J. Ind. Eng. Manag., vol. 16, no. 2, pp. 36–47, 2021, doi: 10.33005/tekmapro.v16i2.240.
R. F. Prabowo, H. Hariyono, and E. Rimawan, “Total Productive Maintenance (TPM) pada Perawatan Mesin Grinding Menggunakan Metode Overall Equipment Effectiveness (OEE),” J. Ind. Serv., vol. 5, no. 2, 2020, doi: 10.36055/jiss.v5i2.8001.
Eddy and Chairunissa, “Peningkatan Overall Equipment Effectiveness (OEE) Pada Mesin Molding Melalui Perbaikan Six Big Losses Di PT. CWI,” J. Optim., vol. 7, no. 1, p. 100, 2021, doi: 10.35308/jopt.v7i1.2537.
S. Sundari and H. Wahyono, “Pengukuran Produktivitas Mesin Tetas Telur Dengan Metode Overall Equipment Effectiveness (Oee) Di Pt. Malindo Feedmill. Tbk.,” p. 6, 2015.
I. N. Dewi, A. R. Putra, H. Kurniawanto, O. Romli, and D. Khaerudin, “Implementasi Metode Overall Equipment Effectiveness Dan Six Big Losses Pada Cutting Machine,” Maeswara J. Ris. Ilmu Manaj. dan Kewirausahaan, vol. 2, no. 3, pp. 59–71, 2024, doi: 10.61132/maeswara.v2i3.883.
A. B. Sulistyo, Nurmaulana, and S. M. Wirawati, “Analisis Penerapan Total Productive Maintenance ( TPM ) dengan Perhitungan Overall Equipment Effectiveness ( OEE ) pada Mesin Sewing di PT Parkland World Indonesia,” vol. 24, pp. 278–288, 2024.
A. Savitri and N. Winarsih, “Membangun Keunggulan Kompetitif: Penerapan OEE dan Six Big Losses untuk Meningkatkan Efisiensi Mesin I-12 di PT. BI,” Ind. J. Ilm. Tek. Ind., vol. 8, no. 2, pp. 333–342, 2024, doi: 10.37090/indstrk.v8i2.1221.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Fajar Kurniawan, Muhammad Isnaini Hadiyul Umam, Ismu Kusumanto

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.